Fire Safety on Building Sites
Building environments, especially those in a temporary phase, present distinct fire hazards due to frequent layout changes, relocatable equipment, and scattered workforces. A sound alerting system is crucial for ensuring all personnel are aware without delay. The Howler line-up, including the radio-based GOLink system, HO units, and site alert models, provides a tailored safety solution to match various site demands.
A Look at HO Alarms
HO alarms are self-powered, battery-operated units used where hard-wired installations are impractical. Ideal for portable cabins or outbuildings, they require no wiring.
- Loud alarm: Around 102 dB at a metre’s distance.
- Optional strobe: Some models include integrated lights for visibility.
- IP-rated: Many are suited for outdoor use or partially exposed areas.
These alarms provide additional coverage where the main alert network may not reach.
The Howler Site Alert Range
Suitable for compact projects, the Site Alert system operates individually or in groups of up to 20 units using a simple two-core cable. When triggered, all devices in the howler site fire alarms network respond simultaneously.
- Approx. 100 dB sound level at 1 metre
- Built-in flashing beacon for loud or noisy settings
- Ideal where cabling is straightforward
Going Wireless: Site Alert RF
Where cabling is limited, Site Alert RF links up to 30 units over wireless. It has an line-of-sight range of around 1 km and supports multiple frequencies for interference avoidance.
Combining wireless and cabled systems is commonly the best strategy for sites with varying structures.
Integrating the GOLink System
The GOLink system serves as a coordinating hub for large, multi-zone installations, using wireless signals to link alarms.
GOLink Interface Connections
Through the Interface Unit, it’s possible to link turnstiles, autodiallers, CCTV, and other site safety components. Up to 127 points can connect across a site-wide network.
Dual-Function Features
Certain models (e.g. H05 GOLink) include a first aid button alongside the fire alert. The first aid signal quietly sends a location-specific assistance request, allowing medical needs to be flagged without general evacuation.
How to Deploy Effectively
- Zone assessment: Identify where alarms need to be heard or seen, dividing the site into manageable sectors.
- Choose connection types wisely: Use hard-wired alarms where feasible, supplementing with RF in distant or pop-up areas.
- Set a maintenance routine: Schedule regular testing and monitor battery levels.
- Training & signage: Ensure instructions are posted and team members know how to respond to alerts.
Common Questions
- Wired capacity?
- Up to 20 Site Alert units can be connected using 2-core cable.
- What’s the wireless range of Site Alert RF?
- Approx. 1 km in open-air conditions, though physical obstructions can reduce range.
- HO panel required?
- No, HO models are self-sufficient and do not require central control.
- Can GOLink interface with other site systems?
- Yes, external systems can be connected via the GOLink Interface Unit.
- Why use an alarmed switch cover?
- It reduces false alarms by sounding a warning if tampered with before activation.
- Hybrid setup compatibility?
- Yes, the GOLink system allows wired and wireless units to operate on the same network.
- Does first aid signal cause evacuation?
- No. It sends a targeted alert to designated receivers without activating evacuation systems—unless configured otherwise.
Final Notes
howler site alarms Whether your project involves one zone or several, Howler alarms—HO, GOLink, and Site Alert—offer solutions that adjust to varying conditions. For details, planning tools or live demos, refer to the Howler section on FireSense.